Pine Straw Harvesting Machines
Our new pine straw harvesting machines, introduced at the recent Sunbelt Expo near Moultrie, Ga., allow farmers and homeowners to rake and bale pine straw. The machines include a self-propelled, hydraulic-driven, 52-in. wide rake, and a 3-pt. mounted, pto-driven round baler. The baler makes bales that measure 15 in. in diameter and 24 in. long. The bales weigh 18 to 24 lbs. so they're easy to handle. An audible signal on the baler tells you when the chamber is full.
The self-propelled rake is powered by an 8 hp air-cooled gas engine and has a pair of gauge wheels. Cranks are used to regulate ground clearance. A horizontal tree protector wheel on the right side of the rake keeps it from scarring trees and allows you to rake to within four inches of them.
There is a market for pine straw but there's never been an efficient way to tap into it. These machines are made for the pine straw industry. They are not modified hay machines.
Our rake sells for $7,250 and the baler for $9,500. (Jim Meier, Madison Tractor & Equipment, 1111 Commerce Dr., Madison, Ga. 30650 ph 706 342-2442; fax 706 342-0555)
Click here to download page story appeared in.
Click here to read entire issue
Pine Straw Harvesting Machines CROPS Straw 25-6-34 Our new pine straw harvesting machines, introduced at the recent Sunbelt Expo near Moultrie, Ga., allow farmers and homeowners to rake and bale pine straw. The machines include a self-propelled, hydraulic-driven, 52-in. wide rake, and a 3-pt. mounted, pto-driven round baler. The baler makes bales that measure 15 in. in diameter and 24 in. long. The bales weigh 18 to 24 lbs. so they're easy to handle. An audible signal on the baler tells you when the chamber is full.
The self-propelled rake is powered by an 8 hp air-cooled gas engine and has a pair of gauge wheels. Cranks are used to regulate ground clearance. A horizontal tree protector wheel on the right side of the rake keeps it from scarring trees and allows you to rake to within four inches of them.
There is a market for pine straw but there's never been an efficient way to tap into it. These machines are made for the pine straw industry. They are not modified hay machines.
Our rake sells for $7,250 and the baler for $9,500. (Jim Meier, Madison Tractor & Equipment, 1111 Commerce Dr., Madison, Ga. 30650 ph 706 342-2442; fax 706 342-0555)
To read the rest of this story, download this issue below or click
here to register with your account number.
