2002 - Volume #26, Issue #2, Page #27
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
"Pistol Grip" Jug Rinser
The unit consists of a water hose pistol with two lengths of 1/4-in. aluminum pipe attached to it in the shape of an "L". One pipe section is 12 in. long and the other 8 in. The sections are connected by a brass elbow fitting. A brass nozzle mounts at the end of the 8-in. pipe section.
Clark turns the chemical container upside down and inserts the nozzle up into the fill opening, and then squeezes the trigger.
"It's easy to use and sure beats having to triple rinse by hand. It also eliminates the need to punch a hole in the jug, so if I want I can use the jug more than once," says Clark. "I use it to rinse out 2 1/2-gal. jugs, but the nozzle is small enough that it will easily fit into a 1-gal. jug. By using longer lengths of pipe it could also be used on 5-gal. jugs."
He says he's willing to sell the rinsers for about $40 plus S&H.
Contact: FARM SHOW Followup, Rusty Clark, 13382 U.S. Hwy. 64, Williamston, N.C. 27892 (ph 252 792-5609).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.