2011 - Volume #BFS, Issue #11, Page #43
Sample Stories From This Issue | List of All Stories In This Issue  | Print this story ]

    «Previous    Next»
Magnetic Socket Inserts
“Our magnetic socket inserts work great for holding bolts in hard-to-reach places,” says Bob Vasichek, Vasichek Enterprises, Michigan, N. Dak.
  The removable inserts contains a strong neodymium magnet that’s designed to securely hold nuts, bolts and self-tapping screws.
  “It’ll hold a bolt straight, no matter what angle you’re holding the socket at,” says Vasichek. “It works great for getting bolts started and especially shines with burrs because it’ll keep the burr in the socket without it falling out.
  “To remove the insert, you take a blunt object such as a bolt, stick it through the ratchet end of the socket and push the insert back out. “A lot of mechanics put the inserts into a set of sockets and leave them in there permanently,” says Vasichek.
  Standard magnetic socket inserts are available in sets of nine from 3/8 to 7/8 in. Metric sets contain 10 pieces from 10 through 19. These sets sell for $9.95 including S&H and fit 1/4, 3/8 and 1/2-in. drive sockets.
  A combination set is available which has both standard and metric inserts. This 19-piece set sells for $17.95 including S&H.
  The inserts are also available in stores including Sears, Northern Tool, and Fleet Farm.
  Contact: FARM SHOW Followup, Vasichek Enterprises, LLC, P.O. Box 197, Michigan, N. Dak. 58259 (ph 701 259-2288; vasent@polarcomm.com; www.brmagneticsockets.com).


  Click here to download page story appeared in.



To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2011 - Volume #BFS, Issue #11