2013 - Volume #37, Issue #3, Page #27
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Add-On "Leveler" Keeps Gate From Sagging
The Level-All gate hanger bolts onto the existing gate post and can be used to hang all manufactured farm gates. It comes with two pins welded to a flat piece of steel and a channel iron bolted to the bottom of the post. The operator turns a 3/4-in. dia. set screw in the channel iron to change the angle of the gate, leveling it.
“It’s a simple idea but it works great,” says Ottomoeller. “The set screw has a lot of leverage so it only takes a few turns to lift the gate. It also works well to level two gates hung opposite each other.”
Ottomoeller sells plans for the Level-All on www.gizmoplans.com.
Contact: FARM SHOW Followup, Roland Ottomoeller, 20496 414th St., Clarissa, Minn. 56440 (ph 218 756-2238; ottoroland51@hotmail.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.