«Previous    Next»
Dolly Makes Shop Storage Easier
“I bought a 7-ft. wide, 3-pt. mounted Deere snowblower about 3 years ago. Upon receiving it I realized the snowblower was too heavy to move by myself, so I built a dolly for it,” says Douglas Fisk of Mondovi, Wis.
    The dolly is made from welded-together 6-in. channel iron and measures 7 ft. wide and 46 in. deep. It rides on 7 steel caster wheels.
    “With the dolly I can place the snowblower where I sometimes couldn’t maneuver the tractor with the snowblower on it,” says Fisk. “It maneuvers well on cement and blacktop. It’s only 8 in. wide in the upright position so during the offseason it takes up very little space. In the winter I use the dolly to push the snowblower from its storage place and position it for mounting on the tractor, which takes only 3 to 5 min.
    “I found that steel rollers work the best. I bought the channel iron and dolly wheels used and spent a total of less than $50.”
    Contact: FARM SHOW Followup, Douglas Fisk, S269 Wergeland Road, Mondovi, Wis. 54755 (ph 715 926-4572).



  Click here to download page story appeared in.


  Click here to read entire issue



To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2015 - Volume #39, Issue #6