Grease Zerk Fitting Attached To Porta-Power
 ✖  |
David Simpler, Elkton, Md.: “I wanted to grease the pins and bushings on my backhoe. However, I couldn’t pump grease into the bushings on some of the grease fittings. I changed the fittings but it didn’t help. Then someone suggested that I adapt a zerk fitting to the hose on a Porta-Power, so I attached the Porta-Power’s 3,000-lb. psi flexible hose to a grease zerk connector. It worked.
Click here to download page story appeared in.
Click here to read entire issue
Grease Zerk Fitting Attached To Porta-Power FARM SHOP Maintenance David Simpler Elkton Md : “I wanted to grease the pins and bushings on my backhoe However I couldn’t pump grease into the bushings on some of the grease fittings I changed the fittings but it didn’t help Then someone suggested that I adapt a zerk fitting to the hose on a Porta-Power so I attached the Porta-Power’s 3 000-lb psi flexible hose to a grease zerk connector It worked
To read the rest of this story, download this issue below or click
here to register with your account number.
