Cordless Drill Starts Self-Propelled Mower Using The Pull Cord
 ✖  |
Trevor Firth, New South Wales, New Brunswick, Canada: “My wife couldn’t start our self-propelled, 21-in. self-propelled mower using the pull cord, so I came up with a way to use a cordless drill to do the job. The pull cord assembly acts on a disc that’s held in place by a 21mm hex nut on top of the engine. I removed the plastic cover to expose the nut and put a socket on it. Then I installed a 3/8-in. square drive shaft on an old cordless drill. To start the mower my wife just runs the drill at low speed.”
Click here to download page story appeared in.
Click here to read entire issue
Cordless Drill Starts Self-Propelled Mower Using The Pull Cord FARM HOME Lawn Mowers 31h 38 Trevor Firth New South Wales New Brunswick Canada: “My wife couldn’t start our self-propelled 21-in self-propelled mower using the pull cord so I came up with a way to use a cordless drill to do the job The pull cord assembly acts on a disc that’s held in place by a 21mm hex nut on top of the engine I removed the plastic cover to expose the nut and put a socket on it Then I installed a 3/8-in square drive shaft on an old cordless drill To start the mower my wife just runs the drill at low speed ”
To read the rest of this story, download this issue below or click
here to register with your account number.
