Garden Cart Made From Discarded Wheel Chair
 ✖  |
Enclosed is a photo of a garden cart I made from a discarded wheel chair. The chair frame was broken but the wheels were good. I started by sawing off the wheels and enough of their mounting hardware to bolt them down securely. I started with a 2 by 4-ft. piece of plywood for the bottom, reinforced with 1-in. lumber. The metal sides are 1/ 16th aluminum salvaged from an industrial roof vent. I put four shelf brackets inside for strength. It'll carry as much weight as the wheel chair ever carried. I use it mostly for firewood. (Tom Martin, Rt. 2, Box 140, Bedford, Va. 24523)
Click here to download page story appeared in.
Click here to read entire issue
Garden Cart Made From Discarded Wheel Chair FARM HOME Food 20-6-37 Enclosed is a photo of a garden cart I made from a discarded wheel chair. The chair frame was broken but the wheels were good. I started by sawing off the wheels and enough of their mounting hardware to bolt them down securely. I started with a 2 by 4-ft. piece of plywood for the bottom, reinforced with 1-in. lumber. The metal sides are 1/ 16th aluminum salvaged from an industrial roof vent. I put four shelf brackets inside for strength. It'll carry as much weight as the wheel chair ever carried. I use it mostly for firewood. (Tom Martin, Rt. 2, Box 140, Bedford, Va. 24523)
To read the rest of this story, download this issue below or click
here to register with your account number.
