1997 - Volume #21, Issue #5, Page #32
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
They Rebuild Manure Tanks
Duane Martin, Rochester, Ind.: "Here are before and after photos of a 1,500-gal. VanDale tank wagon that imploded as it was being emptied. We replaced the tank for about half of what it would have cost had parts and labor been done at the factory."That's our business, rebuilding virtually any brand tank, vacuum or topfill. We manufacture replacement tanks for Clay, VanDale, Badger, Better-Bilt, Calumet and Harvestore wagons, to name a few, out of 1/4-in. thick steel, which is 1/8 in. thicker than the original tanks many wagons are equipped with. We start with 800 gal. tanks for $2,300 and build up to 6,000 gal. Prices include remounting good original parts; any valves, fittings and/or plumbing is extra. Replacing tanks typically takes two to three weeks.
"We also manufacture replacement components such as moisture traps. We also stock a large number of replacement parts and manufacture tanks only."
Contact: FARM SHOW Followup, Du-Mar Welding, 2858 E. 650 N., Rochester, Ind. 46975 (ph 888 223-9891 or 219 223-9889).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.