1998 - Volume #22, Issue #2, Page #04
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Sampler Mounts On Bin Wall
The sampler consists of a 4-ft. long probe which enters the bin at an upward angle. The probe is fitted with a spring-loaded valve connected to a push rod that's controlled from outside the bin.
To use, you simply pull on a rope which opens the valve and allows grain to come down into a pail that hangs on a hook under the bottom of the probe.
Installation on empty bins requires cutting a small hole in the side of the bin. "A 35-ft. high bin requires about three samplers," notes Preston.
Sells for $115 (Canadian) plus S & H.
Contact: FARM SHOW Followup, Dick's Samplers For Grain Bins, Brock, Sask., Canada (ph 800 379-0151; fax 306 379-4405).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.