Pullout Tool Tray Built Into Back Of Pickup
 ✖  |
Brian R. Hebden, Springville, N.Y.: "I have easy access to my tools thanks to this pull-out tool tray which I built into the back of my pickup. The tray slides in and out of the bed. I used 2 by 4's and a sheet of 4 by 8-ft. plywood to make the tray. Garage door hangers and caster wheels underneath the tray make the tray easy to roll out. I installed hold-down rails on the wheel wells or a center-mounted leg to keep the tray from tipping whenever it's pulled out. At the job site I simply open the pickup's tailgate and pull the tray out. The tools are easy to reach from all sides."
Click here to download page story appeared in.
Click here to read entire issue
Pullout Tool Tray Built Into Back Of Pickup PICKUPS Accessories 22-3-29 Brian R. Hebden, Springville, N.Y.: "I have easy access to my tools thanks to this pull-out tool tray which I built into the back of my pickup. The tray slides in and out of the bed. I used 2 by 4's and a sheet of 4 by 8-ft. plywood to make the tray. Garage door hangers and caster wheels underneath the tray make the tray easy to roll out. I installed hold-down rails on the wheel wells or a center-mounted leg to keep the tray from tipping whenever it's pulled out. At the job site I simply open the pickup's tailgate and pull the tray out. The tools are easy to reach from all sides."
To read the rest of this story, download this issue below or click
here to register with your account number.
