Add-On-3-Pt. Hitches For Older Tractors

Add-On-3-Pt. Hitches For Older Tractors HITCHES Hitches 23-1-11 If you've got an older International Harvester, Deere, or Allis-Chalmers tractor without a 3-pt. hitch, you'll be interested in this add-on unit that bolts onto the back of the tractor. "It works as well as 3-pt. factory-installed hitches found on modern tractors," says Dar-win Gross, manufacturer. "Comes preassembled and is raised and lowered by the tractor's internal hydraulic lift or, in the case of IH models, the tractor's dual hydraulic cylinders. Bolts for installation are included. The hitches weigh from 225 to 350 lbs. and their lift capacity is determined by tractor hydraulics. Both lift arms are adjust-able and stabilizer arms are included." Four models are available: one for Inter-national Harvester H, M, 300, 350, 400, and 450 models; for Deere A,B, 50, 60, and 70 models; for Allis-Chalmers D-14, D-15, and D-17 models as well as Series I, II, and III models; and one for Allis-Chalmers WD and WD 45 models. All models sell for $395 plus S&H except for the IH models which are equipped with dual cylinders and can be mounted on the original drawbar. They sell for $595 plus S&H. Contact: FARM SHOW Followup, Dar-win Gross, Box 112, Montrose, Mich. 48457 (ph 810 638-5787; website: www.saginaw countytractor.com)

To read the rest of this story, download this issue below or click here to register with your account number.