Wet And Dry Vacuum Made Easier To Carry
Tom Williams Machine, Inc., HCR 1, Box 1-A, Aurora, Mo. 65605 (ph 417 678-3723; fax 417 678-6000): "We made our 5-gal. wet and dry vacuum easier to carry by bolting a pair of small brackets to the sides of the vac and attaching a 5-gal. pail handle to them. Without a handle, the vac is awkward to carry, especially when it's full.
"I also mounted a pail handle on top of a 3-gal. pump-up spray tank and mounted a 1-in. dia. PVC pipe alongside the tank for storing the sprayer wand. I ran a No. 8 wire band around the tank and secured the pail handle to it. I also ran a wire band around the bottom of the tank and used plumber's tape to attach the pipe to the band. The tank was originally designed to be carried by a metal hand loop secured to a circular lid. However, if you accidentally twist the lid as you hold onto the loop the lid can unlock and fall into the tank. To solve the problem I installed a smooth wire lock around the raised base of the pumper to keep the lid loop from accidentally turning. I also made and inserted a filter under and inside the pump-locking device in order to keep weed seeds and small trash, etc., from getting inside the pump tank."
Click here to download page story appeared in.
Click here to read entire issue
Wet And Dry Vacuum Made Easier To Carry FARM SHOP Handy Hints 25-1-28 Tom Williams Machine, Inc., HCR 1, Box 1-A, Aurora, Mo. 65605 (ph 417 678-3723; fax 417 678-6000): "We made our 5-gal. wet and dry vacuum easier to carry by bolting a pair of small brackets to the sides of the vac and attaching a 5-gal. pail handle to them. Without a handle, the vac is awkward to carry, especially when it's full.
"I also mounted a pail handle on top of a 3-gal. pump-up spray tank and mounted a 1-in. dia. PVC pipe alongside the tank for storing the sprayer wand. I ran a No. 8 wire band around the tank and secured the pail handle to it. I also ran a wire band around the bottom of the tank and used plumber's tape to attach the pipe to the band. The tank was originally designed to be carried by a metal hand loop secured to a circular lid. However, if you accidentally twist the lid as you hold onto the loop the lid can unlock and fall into the tank. To solve the problem I installed a smooth wire lock around the raised base of the pumper to keep the lid loop from accidentally turning. I also made and inserted a filter under and inside the pump-locking device in order to keep weed seeds and small trash, etc., from getting inside the pump tank."
To read the rest of this story, download this issue below or click
here to register with your account number.
