You have reached your limit of 3 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Bale Slicer Fits Skid Steer Loaders
A new bale slicer for skid steer loaders can pick up and carry the biggest bales in addition to slicing them into pieces.
"It lets you haul bales from storage to the feeding area and then cut them up," says Tim Dresen, Precision Farm Machinery, Oelwein, Iowa.
The bale slicer fits most skid steers with bi-
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Bale Slicer Fits Skid Steer Loaders HAY & FORAGE HARVESTING Miscellaneous 25-3-13 A new bale slicer for skid steer loaders can pick up and carry the biggest bales in addition to slicing them into pieces.
"It lets you haul bales from storage to the feeding area and then cut them up," says Tim Dresen, Precision Farm Machinery, Oelwein, Iowa.
The bale slicer fits most skid steers with bi-directional auxiliary hydraulics. It's equipped with four spears and a 6-ft. 10-in. long blade that's raised and lowered by a 3-in. dia. hydraulic cylinder. The blade is protected by a steel guard and has an open height of 8 ft. The unit weighs about 500 lbs. and has a lift capacity of 2,500 lbs.
"You have a much better view of the bale than you do with 3-pt. bale slicers, and you have the maneuverability of a skid loader," says Dresen. "The knife is long enough to cut through bales up to 6 ft. high and 5 ft. 2 in. wide.
Sells for $2,280.
Contact: FARM SHOW Followup, Precision Farm Machinery, 801 2nd Ave. S.E., Oelwein, Iowa 50662 (ph 319 283-5695; fax 2600; Website: www.abcoveyor.com/PFM;).
To read the rest of this story, download this issue below or click
here to register with your account number.
