Pickup-Mounted Ramp Allows One-Man Loading
 ✖  |
This new two-piece ramp, made from 1/8-in. thick steel, simply slides into any standard 8-ft. pickup bed. It works great for one-man loading of ATV's, garden tractors, riding mowers, rototillers, and golf carts, says the manufacturer, adding that it also protects the bed of the pickup.
The "Rapid Ramp" consists of two 8-ft. long hinged sections which retract completely inside a storage table. You simply grab a handle and pull the sections out. Makes it easy to move appliances such as refrigerators, washers and dryers, as well as oil drums and chemical barrels. Or, you can place the back section on top of a sawhorse to make a work bench, or a waist-high service platform for maintenance work. The ramp has a non-slip sanded surface. The back section is split into two sections which can be used independently, if desired.
The storage table fits between the fender wells and can be slid under toolboxes or fuel tanks at the front of the pickup bed.
Sells for $500 plus S&H.
Contact: FARM SHOW Followup, Rapid Ramp, Box 217, Harvard, Neb. 68944 (ph 402 772-3501).
Click here to download page story appeared in.
Click here to read entire issue
Pickup-Mounted Ramp Allows One-Man Loading PICKUPS Accessories 25-3-31 This new two-piece ramp, made from 1/8-in. thick steel, simply slides into any standard 8-ft. pickup bed. It works great for one-man loading of ATV's, garden tractors, riding mowers, rototillers, and golf carts, says the manufacturer, adding that it also protects the bed of the pickup.
The "Rapid Ramp" consists of two 8-ft. long hinged sections which retract completely inside a storage table. You simply grab a handle and pull the sections out. Makes it easy to move appliances such as refrigerators, washers and dryers, as well as oil drums and chemical barrels. Or, you can place the back section on top of a sawhorse to make a work bench, or a waist-high service platform for maintenance work. The ramp has a non-slip sanded surface. The back section is split into two sections which can be used independently, if desired.
The storage table fits between the fender wells and can be slid under toolboxes or fuel tanks at the front of the pickup bed.
Sells for $500 plus S&H.
Contact: FARM SHOW Followup, Rapid Ramp, Box 217, Harvard, Neb. 68944 (ph 402 772-3501).
To read the rest of this story, download this issue below or click
here to register with your account number.
