Tractor Restoration Round-Up

2001 - Volume #25, Issue #6, Page #41

[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]

If you've stashed an antique or collectible tractor or two in the shed for years and still haven't gotten around to starting the planned restoration, you might want to consider turning the job over to a professional.
  There are only a couple handfuls of truly professional tractor restoration experts. We've compiled a list of all we could find (see sidebar). If you know of others, tell us and we'll add them to our list.
  Before you turn a professional loose on your pet tractor project, though, there are a few things you should know. First, most charge an hourly rate of at least $25, plus all parts and materials. Rates of $35 an hour are common, and some charge different rates for different processes. For example, one full-time farm equipment restoration concern charges $25 an hour for general labor, but gets about three times that for specialized work like sandblasting parts to remove rust and old paint.
  Second, if you have a John Deere tractor, you'll likely pay less for the same degree of restoration. There are a couple of reasons for this. One is that there are a lot more aftermarket and restoration parts available for Deere tractors, and there also appears to be more full-time restorers specializing in Deere.
  And it follows, too, that if you're looking for a professional job on an extremely rare machine, restoration is likely to be considerably more costly.
  Dan Peterman, Rusty Acres Restorations, Webster City, Iowa, says parts availability for many older Deere tractors is so good he can usually get what he needs overnight. "I might look for weeks to find a useable part for less popular makes," he says. Peterman says 80 percent of the tractors he restores are Deere, but he collects and restores Masseys himself.
  Lou Spiegelberg, Spiegelberg Restoration and Service, Birmingham, Ohio, figures 85 percent of the tractors he's restored are Deere, but says he'll work on any make or color. He suggests that people who want to try a professional restoration should shop around and ask for references. And, too, he says they need to be prepared to pay part of the cost up front, like a retainer. "I put together a rough estimate of what it will cost and if the customer agrees to that, I ask for a payment of around a third to get started. Then I bill again as I work through the amount already paid," he says. "If you're good at this kind of work and are thinking of starting a business, you need to do something like this in order to have the money to keep going." Plus, he says it keeps you from getting burned by a customer who doesn't pay.
  While you might think there would be fewer and fewer tractors around to be restored, most professional restorers disagree. Most say they already have tractors lined up that will keep them busy for the next 18 to 30 months.
  Ron Jungmeyer, Russellville, Missouri, says he's collected and restored his own tractors for 31 years and has been restoring full time for others for going on 10 years. He believes that not only are there plenty of tractors and other machines out there to be restored, but that the demand for high quality restoration is growing.
  "When I started, most people were just doing paint and major repairs. Now, there are more people collecting who want and can afford a complete professional restoration," he says.
  Most of the restorers on our list say there's room for more people who do what they do. "You just have to know where to find parts or who to call who can help locate them, and then be willing to do the job right," says Peterman.
  Because no two tractors need the same parts, it's hard to say what a restoration might total. Peterman says that it's always twice as much as you thought. While that may sound like he's joking, it's not meant to be funny. He says if the tractor comes in in reasonable shape, the price may be under $2,000, but most, he adds, are in the $2,000 to $3,000 range at his shop. "One I did not long ago cost the owner $12,000," he adds.

Click here to download page story appeared in.

Click here to read entire issue

Tractor Restoration Round-Up TRACTORS Collectors 25-6-41 If you've stashed an antique or collectible tractor or two in the shed for years and still haven't gotten around to starting the planned restoration, you might want to consider turning the job over to a professional. There are only a couple handfuls of truly professional tractor restoration experts. We've compiled a list of all we could find (see sidebar). If you know of others, tell us and we'll add them to our list. Before you turn a professional loose on your pet tractor project, though, there are a few things you should know. First, most charge an hourly rate of at least $25, plus all parts and materials. Rates of $35 an hour are common, and some charge different rates for different processes. For example, one full-time farm equipment restoration concern charges $25 an hour for general labor, but gets about three times that for specialized work like sandblasting parts to remove rust and old paint. Second, if you have a John Deere tractor, you'll likely pay less for the same degree of restoration. There are a couple of reasons for this. One is that there are a lot more aftermarket and restoration parts available for Deere tractors, and there also appears to be more full-time restorers specializing in Deere. And it follows, too, that if you're looking for a professional job on an extremely rare machine, restoration is likely to be considerably more costly. Dan Peterman, Rusty Acres Restorations, Webster City, Iowa, says parts availability for many older Deere tractors is so good he can usually get what he needs overnight. "I might look for weeks to find a useable part for less popular makes," he says. Peterman says 80 percent of the tractors he restores are Deere, but he collects and restores Masseys himself. Lou Spiegelberg, Spiegelberg Restoration and Service, Birmingham, Ohio, figures 85 percent of the tractors he's restored are Deere, but says he'll work on any make or color. He suggests that people who want to try a professional restoration should shop around and ask for references. And, too, he says they need to be prepared to pay part of the cost up front, like a retainer. "I put together a rough estimate of what it will cost and if the customer agrees to that, I ask for a payment of around a third to get started. Then I bill again as I work through the amount already paid," he says. "If you're good at this kind of work and are thinking of starting a business, you need to do something like this in order to have the money to keep going." Plus, he says it keeps you from getting burned by a customer who doesn't pay. While you might think there would be fewer and fewer tractors around to be restored, most professional restorers disagree. Most say they already have tractors lined up that will keep them busy for the next 18 to 30 months. Ron Jungmeyer, Russellville, Missouri, says he's collected and restored his own tractors for 31 years and has been restoring full time for others for going on 10 years. He believes that not only are there plenty of tractors and other machines out there to be restored, but that the demand for high quality restoration is growing. "When I started, most people were just doing paint and major repairs. Now, there are more people collecting who want and can afford a complete professional restoration," he says. Most of the restorers on our list say there's room for more people who do what they do. "You just have to know where to find parts or who to call who can help locate them, and then be willing to do the job right," says Peterman. Because no two tractors need the same parts, it's hard to say what a restoration might total. Peterman says that it's always twice as much as you thought. While that may sound like he's joking, it's not meant to be funny. He says if the tractor comes in in reasonable shape, the price may be under $2,000, but most, he adds, are in the $2,000 to $3,000 range at his shop. "One I did not long ago cost the owner $12,000," he adds.

To read the rest of this story, download this issue below or click here to register with your account number.

SUBSCRIBE OR RENEW NOW