"Panel Clamps" Help Make Better Butt Welds

"Panel Clamps" Help Make Better Butt Welds WELDERS/TORCHES Welders/Torches 26-1-41 You can do a better job welding sheet metal with these "panel clamps", according to the manufacturer who says they make butt welds easier by holding loose edges tightly together. Panel Clamps are designed to be used on mild steel or aluminum with thicknesses between 18 and 24 ga. Made of non-corroding aluminum and stainless steel, the unit holds the edges together while you tack weld them together. Once the clamp is off you can finish the welding. "It works great for patching in replacement panels and for repairing cracks, and allows you to make a butt weld that water can't penetrate," says Scott Brittin, BHP Products, Inc., Katy, Texas. A set of five Panel Clamps sells for $39.95 plus $4 S&H. Contact: FARM SHOW Followup, BHP Products, Inc., 23 Lakefield Tris, Katy, Texas 77493 (ph 800 480-3951; fax 281 391-1249).

To read the rest of this story, download this issue below or click here to register with your account number.