"Power Pack Helps Turn Pickup Into A Service Truck
 ✖  |
Here's one of the slickest systems we've ever seen for turning your pickup into a service truck. The Anaconda "Power Pack" looks like a standard pickup toolbox but actually contains a generator, air compressor, and welder. Measuring 27 in. deep, the toolbox rests on top of the pickup's bedrails and is installed with two bolts on each side.
Inside the lockable compartment is a Kohler 5000-watt generator set, an Ingersoll Rand air compressor that delivers 11.3 cfm at 90 psi, and a Miller 130 amp portable wire feed welder. Fits all full-size pickups, long or shortbed, and can also be mounted on a flatbed truck or trailer.
The unit comes with a remote starter and a driver's side panel for controlling all machinery in the Power Pack.
"It's a compact unit that leaves a lot of room in your pickup bed, and comes with top-of-the-line components," says Tom Hartman, Anaconda Power Pack. "The bottom of the toolbox is 8 in. off the floor so there's room to slide cargo under it. The basic unit, without a welder, sells for $7,800. We do sell the Miller 130 amp portable wire feed welder for $920. However, the welder storage compartment is large enough that farmers can buy any other kind of welder they want from their local dealer. If you don't need a welder you can use the space for another air tank or a bigger fuel tank."
Contact: FARM SHOW Followup, Anaconda Power Pack, 1080 Nimitzview Drive, Suite 404A, Cincinnati, Ohio 45230 (ph 888 834-5854 or 513 233-9223; fax 513 233-9223;Website: www.anaconda powerpack.com/index.htm).
Click here to download page story appeared in.
Click here to read entire issue
"Power Pack Helps Turn Pickup Into A Service Truck PICKUPS Accessories 26-2-41 Here's one of the slickest systems we've ever seen for turning your pickup into a service truck. The Anaconda "Power Pack" looks like a standard pickup toolbox but actually contains a generator, air compressor, and welder. Measuring 27 in. deep, the toolbox rests on top of the pickup's bedrails and is installed with two bolts on each side.
Inside the lockable compartment is a Kohler 5000-watt generator set, an Ingersoll Rand air compressor that delivers 11.3 cfm at 90 psi, and a Miller 130 amp portable wire feed welder. Fits all full-size pickups, long or shortbed, and can also be mounted on a flatbed truck or trailer.
The unit comes with a remote starter and a driver's side panel for controlling all machinery in the Power Pack.
"It's a compact unit that leaves a lot of room in your pickup bed, and comes with top-of-the-line components," says Tom Hartman, Anaconda Power Pack. "The bottom of the toolbox is 8 in. off the floor so there's room to slide cargo under it. The basic unit, without a welder, sells for $7,800. We do sell the Miller 130 amp portable wire feed welder for $920. However, the welder storage compartment is large enough that farmers can buy any other kind of welder they want from their local dealer. If you don't need a welder you can use the space for another air tank or a bigger fuel tank."
Contact: FARM SHOW Followup, Anaconda Power Pack, 1080 Nimitzview Drive, Suite 404A, Cincinnati, Ohio 45230 (ph 888 834-5854 or 513 233-9223; fax 513 233-9223;Website: www.anaconda powerpack.com/index.htm).
To read the rest of this story, download this issue below or click
here to register with your account number.
