Adjustable Roller Stand For Use In Moving Material Into And Out of A Power Saw
 ✖  |
David Gaskell, Horton, Kan.: "I developed this adjustable roller stand for use in moving material into and out of a power saw. Multiple roller stands can be used as needed, depending on what you're cutting. I made it from an old trailer jack. I first cut it down to the right length, and then welded it to a used 20-in. truck rim. A 16-in. roller attaches to the top. With a turn of the crank, a full load of materials can be adjusted to the desired height. Very handy."
Click here to download page story appeared in.
Click here to read entire issue
Adjustable Roller Stand For Use In Moving Material Into And Out of A Power Saw FARM SHOP Repairs 26-5-38 David Gaskell, Horton, Kan.: "I developed this adjustable roller stand for use in moving material into and out of a power saw. Multiple roller stands can be used as needed, depending on what you're cutting. I made it from an old trailer jack. I first cut it down to the right length, and then welded it to a used 20-in. truck rim. A 16-in. roller attaches to the top. With a turn of the crank, a full load of materials can be adjusted to the desired height. Very handy."
To read the rest of this story, download this issue below or click
here to register with your account number.
