Replacement Liner For Case-IH Grain Tanks
 ✖  |
The grain tanks on some Case-IH combine models sometimes rust or wear out around the unloading auger. Replacing the entire tank can cost a lot of money. A new replacement floor patch - made from poly - solves the problem at a fraction of the cost.
The replacement auger liner provides a slippery surface to keep grain feeding into the unloading auger faster. It comes in 1/8-in. thick sections that are held together by pre-cut, hold-down strips of stainless steel, which you bolt onto the original tank. No bolts go through the poly. The curved design of the poly fits tightly against the grain tank floor and allows the poly to expand and contract without buckling.
"It installs quickly and easily, with no welding required," says Pat Reinhart. "It's a much less expensive alternative than replacing the entire tank."
Fits all Case-IH 1600 models except the 1620; all 2100 models; and all 2300 models before serial no. JJCO270499.
Sells for $340.
Contact: FARM SHOW Followup, Poly Tech Industries, Drawer 349, Monticello, Ga. 31064 (ph 800 542-7659; website: www.polyskid.com).
Click here to download page story appeared in.
Click here to read entire issue
Replacement Liner For Case-IH Grain Tanks COMBINES Accessories 27-5-33 The grain tanks on some Case-IH combine models sometimes rust or wear out around the unloading auger. Replacing the entire tank can cost a lot of money. A new replacement floor patch - made from poly - solves the problem at a fraction of the cost.
The replacement auger liner provides a slippery surface to keep grain feeding into the unloading auger faster. It comes in 1/8-in. thick sections that are held together by pre-cut, hold-down strips of stainless steel, which you bolt onto the original tank. No bolts go through the poly. The curved design of the poly fits tightly against the grain tank floor and allows the poly to expand and contract without buckling.
"It installs quickly and easily, with no welding required," says Pat Reinhart. "It's a much less expensive alternative than replacing the entire tank."
Fits all Case-IH 1600 models except the 1620; all 2100 models; and all 2300 models before serial no. JJCO270499.
Sells for $340.
Contact: FARM SHOW Followup, Poly Tech Industries, Drawer 349, Monticello, Ga. 31064 (ph 800 542-7659; website: www.polyskid.com).
To read the rest of this story, download this issue below or click
here to register with your account number.
