Tire Band Saw Made Out Of Two Spare Car Tires
 ✖  |
Eric Webster, Lansdowne, Ontario: "I made the frame of this hydraulic press out of old bulldozer parts. It runs off tractor hydraulics and has a 'bed' made out of a 6-in. wide, 3/4-in thick steel plate. The 6-in. dia. hydraulic cylinder is off an overhead loader and has a 3-ft. stroke so it can develop a tremendous amount of pressure, applying up to 45 tons when used with a newer tractor equipped with a 3,000-lb. pump. Using the tractor's variable flow hydraulics I can slow the press down so much that I can barely see it move. Because of the slow speed it works great for straightening out objects. It can easily bend a 3/4-in. thick piece of metal at a right angle. We have different attachments to fit the shaft. One time we used this press to take a 90 degree bend out of a 4-ft. long hydraulic cylinder shaft.
"I made this tire band saw out of two spare car tires. An electric motor belt-drives a pair of pulleys that turn a shaft that rotates the bottom tire. The saw blade runs from one tire to the other. My only expense was for the blade and the guide.
"My homemade 48-in. belt sander is operated by a 1 hp electric motor. I use it to make furniture. The belt is 6 in. wide. A pair of screws at each end of the unit are used to adjust the belt and keep it running true."
Click here to download page story appeared in.
Click here to read entire issue
Tire Band Saw Made Out Of Two Spare Car Tires WOODLOT EQUIPMENT Miscellaneous 28-2-37 Eric Webster, Lansdowne, Ontario: "I made the frame of this hydraulic press out of old bulldozer parts. It runs off tractor hydraulics and has a ębed' made out of a 6-in. wide, 3/4-in thick steel plate. The 6-in. dia. hydraulic cylinder is off an overhead loader and has a 3-ft. stroke so it can develop a tremendous amount of pressure, applying up to 45 tons when used with a newer tractor equipped with a 3,000-lb. pump. Using the tractor's variable flow hydraulics I can slow the press down so much that I can barely see it move. Because of the slow speed it works great for straightening out objects. It can easily bend a 3/4-in. thick piece of metal at a right angle. We have different attachments to fit the shaft. One time we used this press to take a 90 degree bend out of a 4-ft. long hydraulic cylinder shaft.
"I made this tire band saw out of two spare car tires. An electric motor belt-drives a pair of pulleys that turn a shaft that rotates the bottom tire. The saw blade runs from one tire to the other. My only expense was for the blade and the guide.
"My homemade 48-in. belt sander is operated by a 1 hp electric motor. I use it to make furniture. The belt is 6 in. wide. A pair of screws at each end of the unit are used to adjust the belt and keep it running true."
To read the rest of this story, download this issue below or click
here to register with your account number.
