Wireless Tow Lights Eliminate Wiring Hassles

Wireless Tow Lights Eliminate Wiring Hassles PICKUPS Miscellaneous 28-6-11 Our new wireless tow lights provide a safe, convenient, and fast way to mount turn signals, brake lights, and tail lights on any implement or trailer," says Joe Tarver, Wireless Tow-lights, Lubbock, Texas. The system consists of a transmitter with a magnetic base and a standard male 4-prong flat plug with a 6-ft. harness, as well as super bright LED left and right tail lights. One of the lights is equipped with a battery-operated receiver. The transmitter is attached to the towing vehicle and plugs into the wiring harness. The lights can be attached to the implement or trailer with either two 30-in. mounting straps, or with magnetic mounts. Whenever the driver hits the brakes, the transmitter sends a signal back to the receiver which then activates the turn signals, brake lights, and tail lights. The lights operate up to 24 hours on AA batteries, depending on usage. "It lets you quickly set up lighting on any implement or trailer without having to mess with any wires," says Tarver. "It takes only about 45 seconds to plug in the transmitter and mount the lights on their magnetic bases. Another advantage is that you can switch from a short implement to a long one or visa versa without having to do any rewiring. All you have to do is re-mount the lights. The transmitter can send a signal up to 110 ft. away. The straps can be used anywhere you don't have a metal surface," he notes. Sells for $135 plus S&H. Contact: FARM SHOW Followup, Wireless Tow-lights, 3405 69th Drive, Lubbock, Texas 79413 (ph 800 687-4940; fax 806 795-1647; email: sales@wirelesstowlights.com; website: www.wirelesstowlights.com).

To read the rest of this story, download this issue below or click here to register with your account number.