Calf Carrier Made Out Of A Heavy Plastic Wading Pool
 ✖  |
I made a calf carrier out of a heavy plastic wading pool that I bought at a local discount store. I cut a piece of 3/4-in. plywood to fit inside it, held in place by carriage bolts. Two short pieces of flat iron were used to make attachment points for a nylon tow rope. I used it last spring for the first time and it worked well. The pool cost $10 and the bolts less than $5. I already had the rest of the material. (Clinton Whitney, 1723 S. Country Club Rd., Warsaw, Ind. 46580)
Click here to download page story appeared in.
Click here to read entire issue
Calf Carrier Made Out Of A Heavy Plastic Wading Pool LIVESTOCK Beef 28-6-41 I made a calf carrier out of a heavy plastic wading pool that I bought at a local discount store. I cut a piece of 3/4-in. plywood to fit inside it, held in place by carriage bolts. Two short pieces of flat iron were used to make attachment points for a nylon tow rope. I used it last spring for the first time and it worked well. The pool cost $10 and the bolts less than $5. I already had the rest of the material. (Clinton Whitney, 1723 S. Country Club Rd., Warsaw, Ind. 46580)
To read the rest of this story, download this issue below or click
here to register with your account number.
