1983 - Volume #7, Issue #2, Page #04
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Wear Points Triple Life Of Cultivator Shovels
"The Ni-Hard material the points are made of deflects rocks and other obstacles, and prevents excessive wear even under the toughest conditions. The sweep point takes much of the blow under normal field conditions but, by covering the point, you save wings from wearing too," says Bates.
The Sweep Savers fit 10, 12, 14, 16 or 18-in. shovels, running 3¢ in. down either side of each. The replacement points install quickly by making a 1/4 in. spot weld, using a stainless steel electrode, on the underside and along the outside edges, and then welding the top outer edges with only a 1/4 in. spot weld. Sweep Savers are designed to install on new shovels only.
They retail for $6.00 each.
For more information, contact: FARM SHOW Followup, Digger Bandit Co., 616 34-St. So., Lethbridge, Alta. T1J 3W1 (ph 403 328-2062, or 328-4569).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.