2007 - Volume #31, Issue #3, Page #34
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Stick-On Wrap Protects Posts
"A high density poly film gives it tear and puncture resistance and a waterproof vapor barrier," says Wes Simpson, vice president of MFM Building Products Corp. The company makes similar products for low-sloped roofs and waterproof basements.
"Even treated poles eventually rot out," Simpson says, noting that Post & Pole wrap comes in 3, 6, and 12-in. sizes. Some builders also put the wrap between treated wood and metal fasteners to prevent corrosion.
Post & Pole can be applied at temperatures 35 degrees Fahrenheit and above. Cost is $7.50 for two 3-in. wide rolls or one 6-in. wide roll and $15 for a 12-in. wide roll. Rolls of Post & Pole are 40 mils thick and 25 ft. long. They can be purchased through dealers or direct from the company's website.
Contact: FARM SHOW Followup, MFM Building Products Corp., 525 Orange St., Coshocton, Ohio 43812 (ph 800 882-7663;
www.mfmbp.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.