2004 - Volume #28, Issue #2, Page #18
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Poly Tanks Store Water In A Big Way
The 2,000-gal. units can be plumbed together to extend storage capacity to more than 10,000 gal.
These tanks can be used for capturing rain water as cisterns to store well water.
Before filling, the tanks must be buried and backfilled with sand to provide proper support. The tanks can be insulated in cold climates.
According to Darco Inc. president John Small, the tanks aren't likely to require maintenance for decades other than standard cleaning.
Because each tank weighs just 800 lbs., they can be installed by an average contractor or homeowner with small equipment.
Darco also sells fiberglass tanks for larger storage requirements. These individual fiberglass units range in size from 10,000 gal. to 50,000 gal.; however they may also be interconnected to increase volume even more.
Retail prices for poly and fiberglass tanks work out to an average of $1 per gallon or less, depending on the system size and accessories used.
Contact: FARM SHOW Followup, Darco Incorporated, 980 Darco Drive, P.O. Box 779, Bennett, Colo. 80102 (800 232-8660 or 303 644-5001; email: info@darcoinc.com; website: www.darcoinc.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.