Angle Grinder Conversion
 ✖  |
Kenneth Gustafson, Carney, Mich.: "I need to use an angle drill from time to time, but I didn't want to spend the money for one as they cost anywhere from $200 to $400. So I bought an inexpensive handheld angle grinder at Harbor Freight for $8.88 and mounted a drill chuck on it. The adapter I made to mount it consists of a 3/4-in. nut with a cut-off threaded bolt welded onto it with 3/8 by 24 threading. Works great and I saved a lot of money."
Click here to download page story appeared in.
Click here to read entire issue
Angle Grinder Conversion FARM SHOP Miscellaneous Kenneth Gustafson Carney Mich : I need to use an angle drill from time to time but I didn t want to spend the money for one as they cost anywhere from $200 to $400 So I bought an inexpensive handheld angle grinder at Harbor Freight for $8 88 and mounted a drill chuck on it The adapter I made to mount it consists of a 3/4-in nut with a cut-off threaded bolt welded onto it with 3/8 by 24 threading Works great and I saved a lot of money
To read the rest of this story, download this issue below or click
here to register with your account number.
