«Previous    Next»
Marine Grease Repels Water
Wess Cornelius, Winlock, Wash.: "I've heard of people squirting WD-40 into small engine carburetors to get the engine started in a hurry. But, WD-40 shouldn't be used as a starting fluid because it contains silicone, which will coat the cylinder walls and rings. That will cause the engine to lose compression.
  "For equipment that you frequently run in snow, rain, or mud, use marine grease. Marine grease does a great job of repelling water and creates a barrier for mud. You can put an axle and wheel bearings under water for a reasonable length of time and the marine grease will prevent corrosion and keep the mud from getting into the fittings. Marine grease is inexpensive and can be purchased at any auto parts store.
  "If the tail lights and side marker lights on your vehicles aren't bright enough and are set inside black-colored sockets, use an aerosol can of white spray paint to paint the sockets white. Use cotton or masking tape to keep paint out of the socket. I use this idea on all my vehicles. If you want even more light, replace the original bulbs with halogen bulbs.
  "If you need an air filter in an emergency but one isn't handy, you can use a new oil filter. Simply peel off the filter's metal cover and use a stainless steel clamp to secure the filter in place over the carburetor. I recently used this idea on my air compressor. The oil filter's paper element will let air through just like it lets oil through."


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2011 - Volume #35, Issue #2