Steam Cleaner Modification
 ✖  |
Larry Goodman, Ionia, Mich.: "The company I work for was going to dispose of a steam cleaner that had been sitting around for years because the pump was worn out. However, the water coil and burner were in good shape. I plumbed in a 4-ft. hydraulic hose from the tank from the heater to the washer. Now I have 3,000 psi of hot water (approximately 150?) all for a few dollars. Works great to clean grease off equipment."
Click here to download page story appeared in.
Click here to read entire issue
Steam Cleaner Modification FARM SHOP Handy Hints Larry Goodman Ionia Mich : The company I work for was going to dispose of a steam cleaner that had been sitting around for years because the pump was worn out However the water coil and burner were in good shape I plumbed in a 4-ft hydraulic hose from the tank from the heater to the washer Now I have 3 000 psi of hot water approximately 150? all for a few dollars Works great to clean grease off equipment
To read the rest of this story, download this issue below or click
here to register with your account number.
