Pto Control Levar Fix
Chad Travis, Drasco, Ark.: "The bird beak design on my hand-forged staple puller works great for removing deeply embedded staples from trees and posts. The tool has good balance and feel, and there's a piece of strap metal welded on top to hammer on.
"The pto control lever on my Deere 5000 series tractor broke off in my hand one day when I was using it, so I decided to replace it with one that I made out of 3/4-in. dia. solid cold-rolled rod. I heated the tubing and made a double bend handle at the top. The handle extends much farther off the operator's platform than the factory one, so now I don't have to reach as far to engage or disengage the pto. And, there's enough room underneath the handle for my chainsaw."
Click here to download page story appeared in.
Click here to read entire issue
Pto Control Levar Fix TRACTORS Miscellaneous Chad Travis Drasco Ark : The bird beak design on my hand-forged staple puller works great for removing deeply embedded staples from trees and posts The tool has good balance and feel and there s a piece of strap metal welded on top to hammer on The pto control lever on my Deere 5000 series tractor broke off in my hand one day when I was using it so I decided to replace it with one that I made out of 3/4-in dia solid cold-rolled rod I heated the tubing and made a double bend handle at the top The handle extends much farther off the operator s platform than the factory one so now I don t have to reach as far to engage or disengage the pto And there s enough room underneath the handle for my chainsaw
To read the rest of this story, download this issue below or click
here to register with your account number.
