2011 - Volume #35, Issue #3, Page #40
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Step Kits For Deere Tractors, Skid Loaders
 |
 |
The Agri-Step fits Deere 7000 and 8000 series tractors and measures 16 in. long by 8 in. wide, which Herbold says is 38 percent larger than the factory steps. The step has a see-through design for better visibility. It attaches using existing bolt holes above the tractor's toolbox (bolts included).
"Some of the newer Deere 7000 and 8000 series tractors are equipped with steps, but many of the older models don't have them," says Herbold. "I built my first step for my dad's tractor and he loved it."
The step sells for $170 plus S&H.
The step for Bobcat skid loaders measures 12 in. long by 4 1/2 in. wide. It bolts to the back of the bucket with two 1/2-in. bolts (included). Installation requires drilling 2 holes.
"It provides easy entry and exit from your skid loader without the need to step through or climb over your bucket. It also has a see-through design and should fit any brand of skid loader," says Herbold.
The skid loader step sells for $75 plus S&H.
Contact: FARM SHOW Followup, Neil Herbold, P.O. Box 42, Pierson, Iowa 51048 (ph 712 251-7981; herboldmetalwerks@gmail.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
