2012 - Volume #36, Issue #1, Page #11
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Ear Corn "Squirrel Twirler"
He shaved a 10-ft. long hickory stick so that it’s slightly wider at the bottom. He found the balance point for the stick and drilled a small hole 1 in. above that point, then drove a 20-penny nail through the hole and into the tree. Because the hole is off center the stick normally sets in an upright position. To hold the ear of corn he drove a 1/4-in. dia. metal rod into the end of the stick and drilled a hole lengthwise through the ear.
“As the squirrel climbs up to the ear, its weight causes the stick to rotate down to the ground,” says Reeks. “As soon as the squirrel jumps off, the twirler returns to its original upright position. Sometimes a few kernels end up on the ground. After eating them the squirrel usually climbs back up the stick for more. It’s entertaining to see the squirrel work hard for his meal.”
Contact: FARM SHOW Followup Bill Reeks, 7146 Beaver Dam Rd., Cromwell, Ky. 42333 (ph 270 274-3361).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.