«Previous    Next»
Easy Way To Get Rid Of Crud In Vehicle's Fuel Tank
Allen Dilg, Gurnee, Ill. (ardilg@yahoo): “We do a lot of tractor restorations and came up with an easy way to get rid of crud in a vehicle’s fuel tank. Open the drain on the carburetor, and the fuel should run out in a full stream. If it doesn’t, find a 3/8-in. pipe plug, a coffee can, and a piece of fine brass screen measuring about 1 1/2 in. wide by 2 1/2 in. long. Place the coffee can under the fuel tank and remove the sediment bowl assembly which will let some fuel run out of the carburetor and flush out the crud. Then install the pipe plug.
  “Clean out the sediment bowl and re-install the screen in the top part of the sediment bowl. Put Teflon pipe-thread sealant on the pipe threads and reinstall the sediment bowl assembly. Then after letting the gas set for a while you can pour it back into the tank.
  “I’ve used this method many times with good results. It works a lot faster and easier than removing the fuel tank and then pressure washing it.”



  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2013 - Volume #37, Issue #4