2014 - Volume #38, Issue #2, Page #36
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
How To Salvage Dried-Up Sealed Bearings
Dried-up sealed bearings are often a pain to replace. Instead of replacing them, I drill a pin hole into the bearing and partially refill it with grease. By using this method I’ve been able to keep some bearings running for years.” Allen Kimball, Dover, Ark.: “I’ve had some trouble with the 12-volt system on my Allis Chalmers D19 tractor. I would buy a new regulator and it would work for a while but then quit. Finally I moved the regulator from its original location behind the radiator and ran a separate ground wire from the regulator to the battery.”
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
