2015 - Volume #BFS, Issue #15, Page #34
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
]
Home-Built Chicken Plucker Works Fast
![]() |
His model is a copy of a commercial model. “I had treated plywood and 2 by 4 scraps, and the white top is a 12-in. food grade pvc pipe, heated and flattened out,” McGee says, explaining the chickens are placed on the pvc and never touch the treated wood.
The drum is also a piece of 12-in. pvc pipe with the ends of disassembled squirrel cage blowers. The drum spins on a 1/2-in. steel shaft secured on the outside of the wooden unit with bushings and metal pieces from the blowers. McGee purchased plucking fingers ($1.30 each) from Cutler’s Pheasant Poultry and Beekeeping supply, Inc. (www.cutlersupply.com). They snap in place in the 3/4-in. holes he drilled into the drum.
He wired a waterproof electric box and uses a 3/4 hp Wagner water pump motor to turn the drum.
“I adjusted pulleys – 1 3/4-in. pulley on the motor and 4-in. pulley on the drum – to get the right speed,” he says. “The feathers just shoot out of there up to 5 or 6 ft.”
Once set up it only takes a few seconds per chicken to pluck the feathers clean. After he’s finished, McGee hoses the unit down to clean it up. He stores it in an outbuilding, and the plucker is in like-new condition after 5 years of use.
“It works very well, and it didn’t cost much,” McGee concludes. “It’s really nice for a small flock.”
Contact: FARM SHOW Followup, Jack McGee, 4330 W. Houghton Lake Rd., Lake City, Mich. 49651 (ph 231 839-2765).
![](/img/download-story.png)
Click here to download page story appeared in.
To read the rest of this story, download this issue below or click here to register with your account number.