You have reached your limit of 3 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Hub Puller Fixes Skid Steers Fast
Replacing seals and bearings on skid steer hubs without damaging the hub is a real challenge. That’s why Jerry Titera developed the Hub Master Hub Puller.
“Mechanics tell me it can often take 30 min. or more to get a hub off normally,” says Titera. “It takes me 30 sec. to remove a hub. Watch my video and time m
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Hub Puller Fixes Skid Steers Fast TRACTORS Skid Steer Loaders Replacing seals and bearings on skid steer hubs without damaging the hub is a real challenge That’s why Jerry Titera developed the Hub Master Hub Puller “Mechanics tell me it can often take 30 min or more to get a hub off normally ” says Titera “It takes me 30 sec to remove a hub Watch my video and time me It takes me 2 min to pop the wheel off and have the hub in my hand ” Titera’s brainstorm came out of frustration He had a leaky seal on his Bobcat skid steer and tried to get the hub off and failed The removable hub is a great innovation over other skid steers that still have the hub as a part of the axle However it fits so tight that it can be nearly impossible to get free “After two nights in the shop I had the rough design for my hub puller tried it and it worked ” recalls Titera “All I needed to do was to move the hub 1/16 in and it’s off ” What Titera came up with was a puller plate drilled to match the bolt pattern on the hub It has a big pin at the center Once the wheel is removed he slips the plate with the pin in it onto the bolts and tightens the lug nuts The pressure of the pin against the axle pops the hub loose Titera has a patent pending on his invention which is being produced by Sheyenne Tool & Mfg of Cooperstown N Dak The puller is powder coated and the center pin is coated against rust He has it priced at $438 11 including S&H and tax “I always check back with customers on their satisfaction levels and ask if it was worth the price ” says Titera “They tell me it’s worth it for time saved alone ” Currently Titera makes his Hub Puller for 8-in wheel patterns He plans to come out with a 10-in pattern for the new M Series Bobcat At this time the Hub Puller is only available direct from Titera Contact: FARM SHOW Followup Hub Master Inc 33472 141st Ave Bagley Minn 56621 ph 218 766-7357; hubmasterinc@mail com; www hubmasterinc com
To read the rest of this story, download this issue below or click
here to register with your account number.
