“Get Off” Handle For Riding Mower
 ✖  |
“After a couple hours of work, older operators sometimes have trouble finding their ‘land legs’ when getting off a zero turn mower. So I made an assist handle from galvanized pipe for less than $20. It bolts onto the mower frame and provides the operator with a convenient handhold,” says Kenneth Preston, Wheatland, Ind.
He used 1/2-in. dia. by 30-in. long pipe, a 6-in. nipple, an elbow, cap and a railing base to make the assist handle and attached it to the mower deck using countersunk 1/4-in. machine bolts.
Contact: FARM SHOW Followup, Kenneth Preston, 961 S. Enley Rd., Wheatland, Ind. (klpres@yahoo.com).
Click here to download page story appeared in.
Click here to read entire issue
“Get Off” Handle For Riding Mower FARM HOME Lawn Mowers 31h 38 “After a couple hours of work older operators sometimes have trouble finding their ‘land legs’ when getting off a zero turn mower So I made an assist handle from galvanized pipe for less than $20 It bolts onto the mower frame and provides the operator with a convenient handhold ” says Kenneth Preston Wheatland Ind He used 1/2-in dia by 30-in long pipe a 6-in nipple an elbow cap and a railing base to make the assist handle and attached it to the mower deck using countersunk 1/4-in machine bolts Contact: FARM SHOW Followup Kenneth Preston 961 S Enley Rd Wheatland Ind klpres@yahoo com
