Grease Gun Modification Makes It Easy To Reach Narrow Corners
 ✖  |
Abner Stoltzfus, Leola, Penn.: “Some of the grease zerks on my farm equipment are located in tight corners where I need a hose on the grease gun, and some are in narrow corners too small to reach with my hand and therefore require a solid pipe. I didn’t like having to take both kinds of grease guns with me all the time. So I unscrewed the hose from the pump and slipped a 3/8-in. dia., 8-in. length of conduit over the hose, and then screwed the hose back on. The conduit is just the right diameter to hold the hose tip solidly.
“Whenever I need to use the hose I just slip the pipe back toward the pump to expose the hose. I started using this idea more than 2 years ago and haven’t found a grease zerk yet that I can’t reach.”
Click here to download page story appeared in.
Click here to read entire issue
Grease Gun Modification Makes It Easy To Reach Narrow Corners FARM SHOP Miscellaneous Abner Stoltzfus Leola Penn : “Some of the grease zerks on my farm equipment are located in tight corners where I need a hose on the grease gun and some are in narrow corners too small to reach with my hand and therefore require a solid pipe I didn’t like having to take both kinds of grease guns with me all the time So I unscrewed the hose from the pump and slipped a 3/8-in dia 8-in length of conduit over the hose and then screwed the hose back on The conduit is just the right diameter to hold the hose tip solidly “Whenever I need to use the hose I just slip the pipe back toward the pump to expose the hose I started using this idea more than 2 years ago and haven’t found a grease zerk yet that I can’t reach ”
To read the rest of this story, download this issue below or click
here to register with your account number.
