«Previous    Next»
ATV-Mounted Dump Box
Rich Ferfecki didn’t like pulling a small wagon behind his ATV when doing chores around his place. So he unbolted the box from the trailer and mounted it on back of the ATV, converting it to a handy dumping cargo box.
    The dump box measures 3 1/2 ft. long and 2 1/2 ft. wide and has 1-ft. high sides. It mounts on a pair of rails bolted to the ATV’s rear cargo rack.
    “I use it on my Suzuki 212 4-wheeler to haul everything from firewood to sand, gravel, chicken manure and so forth. It’s much more convenient to use than pulling a wagon,” says Ferfecki. “I don’t have to worry that I might drive around a tree and forget the wagon is behind me. And I have a much better view when backing up. Being able to dump the load is also a big advantage.”
    He bolted a pair of shelving rails onto the cargo rack and then bolted 2 angle iron brackets on the rails and 2 more on the dump body. A 3/4-in. dia. steel rod goes through both brackets to connect the dump body to the ATV and to serve as a pivot point.
    “It’s really handy to use. I researched the internet but couldn’t find anything on the market like it,” says Ferfecki. “Once the dump body is full, I open the tailgate and pull 2 pins from the brackets that hold the rod. Then I walk back and open the tailgate, and then push down on back of the body to dump the load. It’s big enough to hold 2 wheelbarrows worth of firewood or 1 1/2 wheelbarrows worth of gravel.”
    Contact: FARM SHOW Followup, Rich Ferfecki, 554 Green Pond Rd., Rockaway, N.J. 07866 (ph 973 625-3305).



  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2015 - Volume #39, Issue #6