On-The-Go Silage Baler Also Works Stationary

On-The-Go Silage Baler Also Works Stationary BALERS The Agronic silage baler can be towed through the field with a forage harvester blowing silage into the hopper compressing and then dropping wrapped bales out the back It can also be operated while stationary feeding silage into the hopper from a silo or wagon     While designed for silage the Agronic MultiBaler is being used for a wide variety of source materials around the world It works equally well baling peat wood chips and other materials as it does corn grass or alfalfa     Whether used in the field or stationary materials are compacted and rolled into tight round bales before being wrapped in plastic In the field silage baling turns a multi-person job into a one or two-person operation The baler can be towed directly behind a harvester or alongside     Similarly baling silage from a pile or pit requires only one person The same front-end loader or tractor dumping silage into the hopper can be used to remove wrapped bales     Made in Finland the MultiBaler is marketed by Gebr Knoll of the Netherlands It is currently available in 2 models The 820 requires only a 70 hp tractor to produce 33-in wide bales ranging in diameter from 31 to 35 in Bale weight can range from 550 to 1 000 lbs depending on materials being baled It is priced at $87 500     The 1210 requires a 90 hp or larger tractor to produce bales that are 39 in wide and range from 39 to 47 in dia Weights depending on materials range from 1 200 to 2 200 lbs It is priced at $147 400     “We don’t have an appointed sales distributor in North America at the moment ” says Jarold Knoll Gebr Knoll “We would welcome finding one qualified to work with the MultiBaler ”     Contact: FARM SHOW Followup Gebr Knoll Oude Rijksweg 525a 7954 GL Rouveen Holland ph 31-522 291377; info@gebrknoll nl; www gebrknoll nl

To read the rest of this story, download this issue below or click here to register with your account number.