«Previous    Next»
Tailboard Blower Keeps Deere Combines Clean
This new add-on “tailboard trash blower” for Deere combines keeps chaff and dust from building up on the tailboard.
    The 4-ft. long slotted metal tube bolts onto the end of a factory exhaust pipe located above the combine’s chopper or power tailboard. No drilling or cutting is required. Fits Deere S-Series combines including the S550, S650, S660, S670, S680, and S690 models.
    “It eliminates daily cleaning and a potential fire hazard,” says Dave Burgei, S.I. Distributing, Spencerville, Ohio. “It was developed by a farmer who tested it for a couple of years with good results.
    “The problem is that the exhaust pipe on these combines that comes down from the engine wasn’t made long enough to blow air across the tailboard. As a result, the tailboard quickly builds up with trash and dirt. It’s not unusual to have to clean material off the tailboard once a day. Our tube extends the exhaust pipe and directs air onto the tailboard to keep it perfectly clean all of the time. The tube bolts on using three existing bolts.”
    Sells for $169 plus S&H.
    Contact: FARM SHOW Followup, S.I. Distributing, Inc., 13540 Spencerville Rd., Spencerville, Ohio 45887 (ph 800 368-7773; www.sidist.com; info@sidist.com).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2016 - Volume #40, Issue #6