Innovative Way To Flush The Oil In Case IH Quadtrac Tractor
![](/images/resize.php?w=300&img=/images/articles/40/6/36199_l.jpg) ✖ ![](/images/ajax-loader.gif) |
Herb Rempel, Rosenort, Manitoba: “We needed to flush the oil in our Case IH Quadtrac tractor. To do that, you need to turn the rollers and idlers. We saved a lot of hours on the tractor – and lots of fuel – by bolting an electric motor off a table saw to a piece of plywood and fitting it with a large drive belt. I engage the belt-drive by putting a piece of wood under the plywood and stepping on the end to tighten the belt.”
![](/img/download-story.png)
Click here to download page story appeared in.![](/img/entire-issue.png)
Click here to read entire issue
Innovative Way To Flush The Oil In Case IH Quadtrac Tractor TRACTORS Miscellaneous Herb Rempel Rosenort Manitoba: “We needed to flush the oil in our Case IH Quadtrac tractor To do that you need to turn the rollers and idlers We saved a lot of hours on the tractor – and lots of fuel – by bolting an electric motor off a table saw to a piece of plywood and fitting it with a large drive belt I engage the belt-drive by putting a piece of wood under the plywood and stepping on the end to tighten the belt ”