E TIP Fuel Preheaters

E TIP Fuel Preheaters ENGINES All of E TIP Fuel Filter Preheaters™ include a foam rubber insulation layer imbedded on the outside to drive more heat energy into the filter housing maximizing the energy input to stop fuel gelling in the filter In the coldest weather Fuel Filter Preheaters™ keep #2 diesel fuel flowing without additives or blended fuel Bulk Tank Filter Preheater™ Our research shows that gelling fuel blocks the diesel flow at the filter The Bulk Tank Filter Preheater™ keeps the filter open and the fuel flowing Fits 3 5 to 4-in dia filters 7 to 10-in tall filters The 120-volt thermostat-controlled unit has a 7-ft long 3-conductor cord and plug that’s held in place with three stainless springs and nylon ties Vehicle/Equipment Fuel Filter Preheaters™ Available in 12-volt 24-volt and 120-volt models as well as combination voltages with 12-volt/120-volt or 24-volt/120-volt Fits 2 5-in dia to 4-in dia filters at least 4-in tall Eliminates filter changes and labor due to gelling diesel fuel in the filter Held in place with two stainless springs and nylon ties Easy install and removal 3 year warranty Peel & Stick Heaters For Oil Pans Transmissions Hydraulic Systems Water Fuel & Hydraulic Tanks E TIP’s “Peel n Stick” permanent Preheaters™ mount to the outside of the housing and deliver steady even warming to raise the fluid temperature rapidly without burning it No invasion of other systems therefore no leaks Included in each kit version is our flexible ceramic insulation “Peel N Stick” Preheaters™ use one-third to one-half the electrical energy used by engine block heaters Comes with a 3 year warranty Custom designs available Contact: FARM SHOW Followup E TIP Inc P O Box 83 North Aurora Ill 60542 ph 630 966-8992; fax 630 801-9569; www etipinc com; universalpreheater etipinc com; sales@etipinc com; Veteran Owned Small Business

To read the rest of this story, download this issue below or click here to register with your account number.