State-Of-The-Art Clamp-On Bucket Tools

State-Of-The-Art Clamp-On Bucket Tools TRACTORS Accessories “We make the widest variety of clamp-on bucket tools for skid steer and tractor loader buckets - cost-effective tools that let you do more with the equipment you already own ” says Ted McSherry IAM Mfg about his company’s cutting edge bucket-mounted accessories Tools attach with heavy-duty 2 95-in dia C-clamp pads that won’t harm your bucket and create a solid connection without chains or binders A patent-pending 3-way sliding T-handle makes it easy to attach and detach tools “Our bucket clamps eliminate the need to remove or modify your bucket and unlike other imitation products on the market will not damage your bucket All products are made from heavy-gauge steel with powder-coated finish You can see detailed photos and videos at our website www bucketsolutions com ” says McSherry Here are a few of the company’s top-selling products: Clamp-On Receiver Hitches Attaching a receiver hitch to the lip of your bucket lets you back trailers and other equipment around for easy parking as well as use a variety of other attachments Heavy-built unit has a 2 000-lb lift capacity Single clamp sells for $139 Double $199 Quick-Tach Spade “It clamps onto your loader bucket or slides over pallet forks Works great for digging trenches and rooting out tree stumps or buried rocks ” says Ted McSherry about the company’s universal quick-tach spade The spade measures 18 in wide by 23 in long and slides on over pallet forks or clamps onto a loader bucket It comes with a pair of side-by-side tubes equipped with bolts that screw in sideways against the forks You slide the tubes under the bucket and then screw the clamps on Sells for $389 Quick-Tach Tooth Bar For Buckets Universal quick-tach tooth bar is designed for 4 5 and 6-ft buckets and comes with replaceable bucket teeth that bolt into a mounting bar No modification to the bucket is required The patent pending Tooth Bar slides over the bottom edge of the bucket where a portion of the tooth shank goes underneath the bucket touching the bottom of the bucket and screws on each side that screw down on top of the bucket creating a secure fit “It’s easy to put on no drilling is required and the teeth are easy to replace ” says McSherry “Works great for digging through hard soil or digging up hard packed manure ” Prices start at $239 plus S&H for a 40-1/2 in tooth bar with 6 bucket teeth Sizes are: 40-1/2 in 43-1/2 in 46-1/2 in 49-1/2 in 52-1/2 in 55-1/2 in 58-1/2 in 61-1/2 in and 64-1/2 in Heavy-Duty Pallet Forks Pallet forks attach to bucket with IAM’s patented 2 95 in C-clamp pads Heavy-duty forks have capacity of 5 500 lbs and sell for $629 Medium and light-duty models also available for $449 and $319 respectively As shown in photo you can slip in standard 2 by 4’s as backstops in the heavy-duty fork Now all IAMpallet forks have the 2 by 4 backstop Tree & Wood Post Puller Clamped directly to bucket tree puller lifts up to 2 000 lbs yet weighs just 140 lbs Quickly pulls trees and posts up to 6-in dia Grabbing blades hold onto tree so you can pull and carry Sells for $649 Slide-On Debris Fork Adapter Slide-On Debris Fork turns any set of pallet forks on the front of a tractor or skid steer - or even rear 3-pt mounted forks - into a debris fork in seconds for just $599 Multi-Spear Ultra Fork The 13-spear Ultra Fork fits all 4 5 and 6-ft buckets and has a lift capacity of 1 500 lbs Total weight is 230 lbs and it’s 60 in wide Spear length is 24 or 34 in Sells for $799 A smaller model with 7 spears sells for $659 For more information about any of the products on this page go to: www bucketsolutions com or www toothbar net Contact: IAM Mfg LLC 3440 Youngfield St No 403 Wheat Ridge Colo 80033 ph 866 992-2333; ted@bucketsolutions com

To read the rest of this story, download this issue below or click here to register with your account number.