He Gives Hydraulic Floor Jacks An Extra 2 in. Of Lifting Height
 ✖  |
David Norman, Bay St. Louis, Miss.: “I keep hydraulic floor jacks in 4 different pickups. I gave each jack an extra 2 in. of lifting height by welding a 4-in. length of 2-in. square tubing onto it. I removed the pin that secures a steel cup to the jack lift arm and welded the tubing on. Then I drilled a hole in the tubing, placed the cup on top of it, and reinserted the pin.
“The extra 2 in. of lift can often eliminate the need to use spacers when changing a flat tire.”
Click here to download page story appeared in.
Click here to read entire issue
He Gives Hydraulic Floor Jacks An Extra 2 in Of Lifting Height FARM SHOP Miscellaneous David Norman Bay St Louis Miss : “I keep hydraulic floor jacks in 4 different pickups I gave each jack an extra 2 in of lifting height by welding a 4-in length of 2-in square tubing onto it I removed the pin that secures a steel cup to the jack lift arm and welded the tubing on Then I drilled a hole in the tubing placed the cup on top of it and reinserted the pin
“The extra 2 in of lift can often eliminate the need to use spacers when changing a flat tire ”
To read the rest of this story, download this issue below or click
here to register with your account number.
