Mega Mixer Fills Itself

2018 - Volume #42, Issue #5, Page #38

[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]

The Danuser Mega Mixer makes loading, mixing and unloading everything from concrete to feed rations fast and easy. Built for strength, an operator can tip it over and scoop up material from either side and, after mixing, discharge from either side.
  “We were distributing for a bucket mixer, and we kept getting suggestions and ideas from customers on how to improve it,” says Glen Danuser, Danuser Machine Company. “We decided to make our own based on those suggestions.”
  One of the most attractive factors about the bucket is the ability to load or discharge to either side. This is accomplished with hitches as well as scraper blades on both sides and discharge chutes at either end. Simply unhook, drive around to the opposite side, and hook back up to switch discharge directions. The 2-ft. long, multi-link chutes store up and out of the way against the ends.
  Mixing is fast and efficient. A lockable discharge flap limits spilling and speeds mixing. The 8-in. auger is available in all steel (S75) or with rubber flighting (R75). Powered by the heavy-duty, low-speed, high torque, hydraulic drive motor, the Mega Mixer can discharge 3/4 cu. yd. in 35 secs.
  “Our rubber auger is great for wet, loose materials and most materials other than 1-in. rock and asphalt,” says Danuser. “The steel auger is recommended for all but mortar and grout that can leak out.”
  The Mega Mixer has a 3/4 cu. yd. capacity, but that can be stretched to a full yard with an optional hopper extension. The motor requires a 25 gpm, 3,500-psi hydraulic system.
  The versatility of the unit amazes even its designers. “We are constantly getting questions about what it will do,” says Danuser. “We encourage people to try what they want to do with a demonstration bucket. As a result, our materials chart is constantly changing as we test what they have done. Making it better is an ongoing process.”
  The S75 is priced at $4,995 and the R75 is priced at $5,495.
  Contact: FARM SHOW Followup, Danuser Machine Company, P.O. Box 368, 500 E. 3rd St., Fulton, Mo. 65251 (ph 573 642-2246; www.danuser.com).

Click here to download page story appeared in.

Click here to read entire issue

Mega Mixer Fills Itself LIVESTOCK Beef The Danuser Mega Mixer makes loading mixing and unloading everything from concrete to feed rations fast and easy Built for strength an operator can tip it over and scoop up material from either side and after mixing discharge from either side “We were distributing for a bucket mixer and we kept getting suggestions and ideas from customers on how to improve it ” says Glen Danuser Danuser Machine Company “We decided to make our own based on those suggestions ” One of the most attractive factors about the bucket is the ability to load or discharge to either side This is accomplished with hitches as well as scraper blades on both sides and discharge chutes at either end Simply unhook drive around to the opposite side and hook back up to switch discharge directions The 2-ft long multi-link chutes store up and out of the way against the ends Mixing is fast and efficient A lockable discharge flap limits spilling and speeds mixing The 8-in auger is available in all steel S75 or with rubber flighting R75 Powered by the heavy-duty low-speed high torque hydraulic drive motor the Mega Mixer can discharge 3/4 cu yd in 35 secs “Our rubber auger is great for wet loose materials and most materials other than 1-in rock and asphalt ” says Danuser “The steel auger is recommended for all but mortar and grout that can leak out ” The Mega Mixer has a 3/4 cu yd capacity but that can be stretched to a full yard with an optional hopper extension The motor requires a 25 gpm 3 500-psi hydraulic system The versatility of the unit amazes even its designers “We are constantly getting questions about what it will do ” says Danuser “We encourage people to try what they want to do with a demonstration bucket As a result our materials chart is constantly changing as we test what they have done Making it better is an ongoing process ” The S75 is priced at $4 995 and the R75 is priced at $5 495 Contact: FARM SHOW Followup Danuser Machine Company P O Box 368 500 E 3rd St Fulton Mo 65251 ph 573 642-2246; www danuser com

To read the rest of this story, download this issue below or click here to register with your account number.

SUBSCRIBE OR RENEW NOW