«Previous    Next»
Garbage Can Lock Keep Animals From Tipping Over Garbage Can
I made this simple “garbage can lock” to keep animals and high winds from tipping over my garbage can. I drilled a hole through the top of a 3-ft. length of square tubing and inserted a short 3/8-in. dia. rod through it, then bent the rod down to form a hook that doubles as a handle. I also welded the top of the tubing shut to keep leaves and snow out.
  To lock the can in place I drive the tubing into the ground until the rod is about 1 in. above the can’s dump bar, and then latch the hook onto it. To unlock the can I just lift the rod out of the tubing. I sell my garbage can lock for $45 including S&H (U.S. only). (Kenneth Harwick, 724 7th Ave., Madison, Minn. 56256 kharwick@frontier.net; ph 320 598-3268)



  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2019 - Volume #43, Issue #2