Cultivator Sweep Takes Larger Bolts
 ✖  |
Steve Faber, Tiffin, Ohio: “The sweeps on my field cultivator use 3/8-in. dia. bolts, but I wanted to use a sweep that takes larger bolts. As a result, the square under the head of a 3/8-in. plow bolt wouldn’t take hold. Bolts with oversize heads are available, but I didn’t have any. So I took a couple of larger bolts I already had and drilled and tapped them to 3/8-16. I then cut off the heads and used hex head bolts to mount the sweep.”
Click here to download page story appeared in.
Click here to read entire issue
Cultivator Sweep Takes Larger Bolts CULTIVATORS Steve Faber Tiffin Ohio: “The sweeps on my field cultivator use 3/8-in dia bolts but I wanted to use a sweep that takes larger bolts As a result the square under the head of a 3/8-in plow bolt wouldn’t take hold Bolts with oversize heads are available but I didn’t have any So I took a couple of larger bolts I already had and drilled and tapped them to 3/8-16 I then cut off the heads and used hex head bolts to mount the sweep ”
To read the rest of this story, download this issue below or click
here to register with your account number.
