2020 - Volume #44, Issue #3, Page #34
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Metal Pegboards Built To Hold Heavier Tools
![]() |
The steel pegboards measure 48 in. long by 16 in. high, and are notched on back to fit over studs 16 in. on center. As a result, multiple boards fit perfectly both horizontally and vertically. The pegboards come with dual hole sizes in alternating rows to fit 1/4-in. and 1/8-in. pegboard accessories. They have pre-drilled holes on all 4 sides, making them easy to mount.
The pegboards are sold in sets of 4, for less than $100.
“These pegboards are much sturdier than flakeboard or pressed wood pegboards, so you can hang heavier tools and other objects on them,” says Saunders. “We sell a lot to shed builders, who install them above their built-in workbenches.”
The company also sells an alternative pegboard design for finished and semi-finished walls. Those pegboards come with a lip on the edges that provides about 1/4 in. of space behind the board to make room for pegs.
Raytec does not sell directly to customers, but says they can direct farmers to a local store or distributor that sells their products.
Contact: FARM SHOW Followup, Raytec Mfg., 544 Gristmill Road, Ephrata, Penn. 17522 (ph 877 800-2500; sales@raytecllc.com; www.raytecllc.com).
![](/img/download-story.png)
Click here to download page story appeared in.
![](/img/entire-issue.png)
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.