Adjustable Combine Grain Spout
 ✖  |
“Our new Target Spout directs grain flow from any conventional auger in a concentrated area that makes it easy to load trucks and wagons without spilling, even if the spout isn’t positioned directly over the center of the truck or wagon. You can easily adjust the grain flow forward or backward just by cranking a lever,” says Steve Mast, Mast Productions, Inc., Payson, Ill.
The triangle-shaped metal spout comes with a universal bolt-on mounting kit and is designed to fit most 10 and 13-in. dia. augers. A hand-operated winch at the lower end of the auger is connected by cable to a metal bracket that supports a long spring that’s attached to the spout. Pulling on the winch’s crank extends the spout forward about 2 ft. Let go of the crank and the spring retracts to pull the spout back to its original “straight down” position.
Contact: FARM SHOW Followup, Mast Productions, Inc., Payson, Ill. 62360 (ph 217 656-3911 or cell ph 217 779-8006; mastpro@adams.net).
Click here to download page story appeared in.
Click here to read entire issue
Adjustable Combine Grain Spout COMBINES Accessories “Our new Target Spout directs grain flow from any conventional auger in a concentrated area that makes it easy to load trucks and wagons without spilling even if the spout isn’t positioned directly over the center of the truck or wagon You can easily adjust the grain flow forward or backward just by cranking a lever ” says Steve Mast Mast Productions Inc Payson Ill The triangle-shaped metal spout comes with a universal bolt-on mounting kit and is designed to fit most 10 and 13-in dia augers A hand-operated winch at the lower end of the auger is connected by cable to a metal bracket that supports a long spring that’s attached to the spout Pulling on the winch’s crank extends the spout forward about 2 ft Let go of the crank and the spring retracts to pull the spout back to its original “straight down” position Contact: FARM SHOW Followup Mast Productions Inc Payson Ill 62360 ph 217 656-3911 or cell ph 217 779-8006; mastpro@adams net
To read the rest of this story, download this issue below or click
here to register with your account number.
